DMOne™ Platformby eAppSysAI-enabled accelerator for Oracle Fusion
DMOne™ / Modules / ConfigIQ™
DMOne™ platform module, stage 1: Configure

ConfigIQ™

ConfigIQ™ Studio captures the full Oracle Fusion setup of any environment, shows what is missing or different, lets teams make changes on screen or in Excel, and delivers setup to the target after approval. A built-in assistant answers plain-English questions about setup.

AI assistant for plain-English questions about setup
HCM, ERP, SCM, PPM and PLM, standard and custom setup
Configuration data only: no personal, financial or HR data

The problem

What goes wrong without ConfigIQ™

On most Fusion projects, setup is entered by hand in each environment. Small differences go unnoticed until testing fails, and each quarterly update can change values without anyone noticing.

ProblemHow ConfigIQ™ solves it
Configuration knowledge sits with a few senior consultants

The Configuration Assessor checks setup against Oracle’s documented requirements and recommended practices, one functional area at a time.

Setup keyed manually in each environment

Setup is captured once and delivered to each environment, so the same values are not entered four times.

Differences found only when testing fails

Comparisons of DEV, SIT, UAT and PROD show missing and different setup before testing starts.

Oracle quarterly updates change settings

A baseline is taken before the update and compared after it, so changed or reset values are identified.

Configuration-related defects are hard to trace

Comparing a working and a failing environment isolates the configuration differences behind the issue.

New business units repeat manual configuration

A validated business unit is used as the template for the new one, with targeted changes applied.

Audits need evidence of configuration

Point-in-time configuration reports support SOX and ISO reviews.

The solution

How ConfigIQ™ solves it

Setup is captured once and delivered to every environment, instead of being keyed by hand in each one.

  • Compare environments in about half a day rather than checking setup screen by screen
  • Find setup differences before testing starts, not when tests fail
  • Create business units, ledgers, legal entities and legislative data groups from existing configuration for each rollout
  • Check setup quickly after each Oracle quarterly update
  • Check setup against Oracle’s documented requirements and recommended practices with the Configuration Assessor
  • Generate configuration documentation on demand, instead of maintaining it in spreadsheets

In brief

The same module, explained for three readers.

For CXOs and data owners

Fewer environment-related defects and less rework after Oracle quarterly updates. No personal or financial data is extracted.

For project managers

Plan it for design and build, each refresh and each quarterly update. A comparison takes about half a day; a configuration move takes hours to a day.

For solution architects

SaaS on Oracle OCI in the UK region. Captures setup from each Fusion environment, compares it and delivers it by task with validation and approval. Delivery runs in dependency order and adds or updates records; it never deletes.

What it does

Snapshots

Capture configuration from DEV, SIT, UAT or PROD by product group, functional area and task. Create, replicate, copy or filter snapshots.

Comparisons

Compare two snapshots to find mismatched and missing records, including before and after an Oracle quarterly update.

Deployment

Move configuration to a target environment with task selection, validation and approval. Reuse a deployment setup for repeat moves.

Bulk changes

Export configuration, add or update it in bulk, then import it back.

AI assistant

Ask plain-English questions such as “What differs between UAT and Production?” or “What is waiting for approval?”

New configuration from existing

Create countries, business units, ledgers, legal entities and legislative data groups from existing configuration for faster rollouts.

Configuration Assessor

An AI agent built on Oracle’s Fusion Setup and Configuration Registry checks a live environment or planned workbook against Oracle’s documented requirements and recommended practices.

Configuration documentation on demand

Generate up-to-date configuration documentation from any environment whenever it is needed: for design sign-off, audits, support handover or after each Oracle update.

What environment teams need

Environment teams need four capabilities. Each one removes a specific manual task that causes delay or risk.

What teams needHow ConfigIQ™ Studio meets it
Environment migration

Moving tested setups from UAT to PROD should not mean re-keying them by hand. Teams need to promote selected tasks, not whole FSM groups, in the right dependency order. A dry run should show what will happen before anything changes in the target.

Individual configuration tasks, or sets of tasks, are delivered to the target in dependency order. Delivery adds or updates records and never deletes, and nothing is sent without approval.

Change auditability

Every change needs a record of who made it, who approved it, when it was applied and what it replaced. Without this, root-cause analysis after a production issue becomes days of guesswork.

Every delivery needs approval and is kept as a locked record of what was sent. Snapshots taken before and after a change show what it replaced.

Configuration documentation

Documentation kept in spreadsheets goes out of date within weeks of go-live. It should be generated from the environment itself, so it reflects what is actually configured.

Configuration documentation and point-in-time reports are produced from snapshots of the environment, so they show what is configured, not what was planned.

Environment comparison

Teams need to compare any two instances, or one instance before and after a quarterly update. The output should list mismatched and missing records, not just a count.

Any two snapshots can be compared, including the same environment before and after an Oracle update. The comparison report lists each mismatched and missing record.

What is new in ConfigIQ™ Studio

Announced at Oracle AI World 2026, Las Vegas. Available now.

AI-driven assistance

A built-in assistant answers plain-English questions about setup.

“What differs between UAT and Production?”

3 differences found
2 values in Payroll setup
1 missing approval rule

“What is waiting for approval?”

Expanded coverage

Every setup area, standard and custom, across Oracle Fusion Cloud. Product Lifecycle Management is now covered.

HCMERPSCMPPMPLM New
  • Simplified chart of accounts management
  • Project templates management

Advanced capabilities

Create new configuration from existing configuration, so rollouts move faster.

  • Countries
  • Business units
  • Ledgers
  • Legal entities
  • Legislative data groups

Delivery runs in the correct order. It adds or updates records and never deletes.

A simpler user experience

Make changes on screen or in Excel, with only valid choices offered, so fewer errors reach testing.

Configuration Assessor: checking setup against Oracle’s own rules

Oracle’s new Fusion Setup and Configuration Registry (FSCR) captures Oracle’s setup tasks together with the data-quality and best-practice rules behind them. That knowledge usually sits only with senior consultants. With FSCR, a Fusion environment or a planned configuration can be checked systematically against Oracle’s documented requirements and recommended practices.

eAppSys has built an AI agent on FSCR and added it to ConfigIQ™ as a new Configuration Assessor.

  • Assess a live environment or a planned configuration workbook, one functional area at a time
  • Findings ranked High, Medium and Low, each marked as an Oracle requirement, an Oracle-recommended practice or reviewer judgement
  • Every finding shows the affected ledgers and a recommended fix, which can go straight into a ConfigIQ™ workbook
  • Read-only: nothing changes in Oracle, and eAppSys experts review every finding before sign-off

Our thanks to the Oracle team for opening up FSCR.

One governed flow for Oracle Fusion setup

Every delivery needs approval and is kept as a locked record of what was sent.

  1. Capture

    Take the full setup of any environment from Fusion.

  2. Compare

    See what is missing or different between environments.

  3. Change

    Make changes on screen or in Excel.

  4. Deliver

    Move setup to the target environment, after approval.

From the eAppSys team

“Oracle Fusion projects lose time when setup drifts between environments. This release lets teams ask questions in plain English, cover more of Fusion, and move setup with less manual effort, while keeping approvals and the audit trail in place.”

Praveen BaddamDirector and CEO, eAppSys

“On a multi-country rollout, the same setup is built and checked many times over. ConfigIQ Studio gives programme teams one place to see what is in each environment, agree changes and move them forward in a controlled way.”

Richard PepperTransformation Director, eAppSys

Ten common uses

Grouped by the purpose they serve on a programme.

UseWhat it involvesPurpose
Environment comparisonCompare DEV, SIT, UAT and PROD to find differences and alignment gaps before go-liveValidation
Before and after Oracle updatesBaseline before an update, compare after it, and flag values that changed or were resetUpdates and audit
Configuration issue assessmentIsolate configuration differences between a working and a failing environment during triageIssue resolution
Full configuration set migrationMove profile options, lookups and workflow attributes with dependencies in the right orderMigration
New business unit from an existing oneUse a validated business unit as the template for a new rollout, with targeted changesRollouts
Upgrade readinessCompare settings against a certified baseline before an upgrade to identify blockersValidation
Audit and compliance reportingProduce point-in-time configuration reports with change evidence for SOX and ISO reviewsUpdates and audit
Harmonisation after an acquisitionMap the acquired organisation’s configuration against the group template and plan the changesMigration
Hypercare monitoringRe-scan production on a schedule after go-live and report unexpected changesMonitoring
Regression test preparationApply configuration differences so test environments match production before each regression cycleTesting

Typical scenarios

Durations depend on scope. Some scenarios are best run as a service because of the checks needed between steps.

ScenarioDetailDelivered asTypical duration
Compare environmentsIdentify configuration differences, including before and after Oracle updatesToolAbout 0.5 days
Migrate a complete environment buildMove all configuration tasks to another environment without changesToolAbout 1 day
Compare or migrate specific tasksTarget individual configuration tasks rather than the full setToolHours to 1 day
Migrate BU A into BU BUses filtered snapshots, with steps between runsTool and serviceHours to 1 day
Migrate a configuration set with changesIncludes manual steps during executionTool and serviceDepends on scope
Build new configuration from scratchNot applied initially through the toolNot supportedNot applicable

Where it fits

Design and build, every environment refresh, before and after quarterly updates, and new BU rollouts.

For SI partners

Partners use ConfigIQ™ to compare client environments, prepare BU rollouts and check configuration after each Oracle update, during implementation and in support.

How the partner model works

Arrange a demonstration of ConfigIQ™

We will demonstrate the module using a scenario from your programme.